AL 31

Lifting capacity

1500 kg

Lifting height approx.

0.4m or 0.5m

Flat load capacity

3 tons

AL 31 is a flatbed tow truck primarily intended for light flatbed and barbecue towing as well as fast and smooth transport. It is built entirely according to our strict Scandinavian requirements. The customer category for this construction is those who are primarily in need of a slightly smaller construction and where economy, flexibility and speed are characteristics. In this tow truck, we have combined the characteristics of the "light flatbed tow truck" and the flexible vehicle transporter.

CHASSI

Suitable chassis should have a total weight of 6 - 7 tons. Wheel base should be a minimum of 4.3 m. Air suspension and low profile tires to get a better load angle. PTO for direct mounted pump. Gear ratio 1:1. The chassis must be equipped with underrun protection.

FLAK

The flat construction in aluminum is slightly angled at the back (spoiler pocket) for minimal entry angle. The bed has a straight edge profile, can be hydraulically removed and pushed to facilitate loading and unloading of vehicles. Flat drainage included

HELP AND TIPPING FRAME

Helper barge and tipper barge are made of VKR profile in high-strength steel, which is hot-dip galvanized for corrosion resistance. The superstructure is mounted on the chassis according to the truck manufacturer's instructions.

LIFTING UNIT

The lifting unit is made of high-strength steel that is hot-dip galvanized for corrosion resistance. It has a single push-out with a reach of 1.3 m. Lifting capacity in the outer position is 1,500 kg. It is operated hydraulically from the control cabinet. Integrated passenger car halves and 50 mm bullet included.

THE STORAGE AREA

The standard includes a tool cabinet in reinforced composite (1.0 x 0.4 x 0.46 m) on the left side.

WINCHES

A flatbed winch of planetary gear type with a pulling force of 3.6 tons is mounted on the flatbed. Break rollers near the lint drum. The line drum can be manually disengaged. The diameter of the rope is 10 mm and the length 24 m. On the winch there is a 50 mm "caravan ball" mounted.

ELECTRICAL SYSTEM

All electrical cables are protected against external damage according to protection standards. This means that the electrical cables are provided with a protective cover similar to the chassis manufacturers' design. The electrical system is connected via fuses and relays which are located in the right cabinet. Two side marker lights on each side and electric emergency stop.

• Four working lights, two on the front trunk and two on the back
• Tail lights according to the chassis' original location
• License plate and lighting left rear
• Lighting in the cabinet at the operating valve

HYDRAULIC SYSTEM

• Hydraulic tank with return filter, tank volume is approximately 38 l
• Hydraulic pipes, electrolytically galvanized
• Suction and return hose with embedded steel spiral
• High-pressure hoses with pressed couplings and two steel inserts
• Hydraulic pump of axial piston type with emergency stop function
• Control unit located on the right side
• Unit equipped with shock/refill valves and main overflow valve
• The operating levers are spring-centering
• Glycerine dampened manometer for checking hydraulic pressure

OTHER

• Hard plastic rear fenders with splash guards according to legal requirements
• Shovel, broom including holder
• 3 pairs of tension straps
• CE marking
• Front trunk and edge line are painted in the same color as the cabin
• Mineral oil
• Weighing and inspection in Sweden

BASS EXECUTIVE

CHASSIS

20.130

Elevable light ramp 1.5 meters with air

2000.510

Body sides aluminum

FLAK

10.10

Flat width beyond standard, per dm

20.08

Flat extension per dm in addition to standard

20.127

High frame including 2 red width marking lights

20.129

Net shelf under flatbed

2000.220

Motorcycle holder

2000.991

Motorcycle holder on the grill

40.28

Straight flatbed

AGGREGATE

20.123

Crane extension 1.6 m – 2 tons

20.124

Support leg in combination with 20.123

2000.09

Oil cleaning container (1)

2000.25

Reserve cans (2) with holder

2000.26

Spare wheel holder

300.10

Frame for trailer coupling

500.081

Line wheel mounted inside cabinet

500.19

Tow bar with holder

800.011A

THE STORAGE AREA

34.30.0001

Air compressor, complete with 15 l tank

34.001.0005

Air coil, mounted in cabinet

34.06.0001

Jack

24.51.0008

Cabinet for jack

21000.114

Stainless cabinet 1.2 x 0.6 x 0.5

21000.56

Stainless cabinet 1.4 x 0.5 x 0.5

21000.57

Stainless cabinet 1.0 x 0.5 x 0.5

21000.570

Stainless cabinet 1.0 x 0.65 x 0.5

21000.60

Stainless cabinet 1.0 x 0.6 x 0.55

21000.69

Stainless cabinet 1.2 x 0.5 x 0.5

21000.84

Stainless cabinet 0.8 x 0.5 x 0.5

21000.840

Stainless cabinet 0.8 x 0.55 x 0.5

WINCHES

200.18

3.6 ton winch mounted on lifting boom

200.181

3.6 ton winch frame-mounted

200.21

Steering roller bridge for frame winch

200.25

Hydraulically side-displaceable flatbed winch

ELECTRICAL SYSTEM

600.07

Rear lights and indicators on front trunk

600.052-12

Starting cable set 12 volts

600.055-12

Starting cable set 12 volts, mounted in cabinet

600.10

Lighting in a cupboard

600.16

An extra work light

600.342

Vision Alert 1.5 m

600.344

Vision Alert 1.8 m

W02.01.054

Flashlight (1 pc.) yellow, built into original lamp

6000.500

Taillights original, one pair for front trunk, not fitted

6000.501

Mounting of the above rear light

6000.502

Cabling for light sign

6000.503

License plate/lighting front stem

851.03

Flash lights (pair) built in

200.301

Uncoupling with a button per winch with radio control and/or compressed air

RADIO CONTROL

BB9006

Radio control 8 channels

BB9008

Radio control 10 channels

200.296

Installation of radio control BB9006/8

200.297

Holder for radio control incl. connection

Item 8

Radio control 8 channels

Item 10

Radio control 10 channels

Item 12

Radio control 12 channels

600.436

Electric control prepared for radio per function

HYDRAULIC SYSTEM

2000.29

Valve console left side

OTHER